How to Repair Vinyl Office Chair Armrest? 5 Easy Steps!

Are you trying to know how to repair vinyl office chair armrest? Here we have got simple steps for you to fix this. Chairs are our daily partners. We need them in our lives on different occasions at different sites for sitting purposes. They support your back and provide you with comfort. Allowing you to sit and work daily, chairs become your best partners you spent your most time sitting on daily.

The chairs are made up of plastic, steel, aluminum, iron, wood, vinyl, etc. The vinyl material is used mostly in making office or formal chairs as it is durable. But nothing is perfect and it may break. The armrests of the office chair are specially made of vinyl and they can break due to several reasons.

What is Vinyl?

Vinyl is a type of plastic. Some types of vinyl material available in the market are soft and other is hard or rigid. They are also flexible. It is actually a sheet of plastic but called as vinyl. For upholstery, this soft, stretchable, and durable vinyl material is used. Vinyl is cheaper than plastic. It can easily be made and manufactured.

The furniture made out of hard vinyl can be of different sizes, types, and shapes. This lets you make luxury leather furniture without spending much money. It saves time and money. So, now you don’t have to spend a fortune over making leather furniture, vinyl is at your service for this purpose. The vinyl products and furniture especially the chairs are good-quality and inexpensive. They also look good.

Are Vinyl armrests durable?

Vinyl is indeed a durable material for making furniture and office chairs. As mentioned earlier, it is one of the highest quality plastic sheets and is inexpensive too. It makes the arm rests durable and professional-looking.

How the Vinyl chair armrests are important?

The vinyl armrests make the chair ergonomic for you. It keeps the chair in your control and provides support to your body parts like arms. These should be comfortable so that you sit properly and can only focus on your work rather than the position of the chair. If the armrests are not comfortable then they can make your sitting angle of the chair worse which will affect your body ultimately. Also, it can cause you pain or numb feeling in your arms, neck shoulders.

The vinyl armrests are comfortable and durable, but if you won’t take care of them then they will either split up or fall off entirely.

Why do the Vinyl chair armrests break or split?

The plastic material needs coating and polishing with special layers to keep them from splitting or converting into layers and sublayers. The vinyl material is a soft, stretchy, and durable material and if not taken care of it can be splinted into cracks. The cracks eventually break through and the whole structure is demolished. So, some kind of coating is needed to keep the surface shiny and alive.

Almost all the vinyl upholstery has the same quality, some expensive vinyl material is not good while some of them seem very good and they keep this quality for a long time.

The vinyl products are especially affected by the rays of sunlight as they dry the material. This is also a reason that cracks appear in the vinyl armrests. So, if you work in a sunny room, your vinyl chair would be the one to be replaced first.

How to Repair Vinyl Office Chair Armrests?

The vinyl chair armrest can easily be repaired. Several types of leather and vinyl chair repair kits are available in the market. However, still getting things from home and repairing the vinyl chair armrest is a very easy task to perform. The material required for this repair is:

  • Vinyl repair kit
  • Hair Dryer
  • Bath towel
  • Heater
  • Rubbing Alcohol
  • Sandpaper
  • Finishing spray
  • Some liquid soap to wash hands and face

The steps are as follows:

  • Step 1:

Take a washcloth and dip it into warm water. Clean the armrest with the help of the washcloth. It should be cleaned through every inch even between the cracks and splits properly. This is done so that every dust particle or dirt is removed from the armrest surface. The soap water is also used to clean the vinyl armrest.

  • Step 2:

The armrest is dried with the help of another dry washcloth. It is dried completely. If necessary a paper towel is used to clean and dry the armrest properly. Give it some time to air dry as well. Now, apply the topcoat into the cracks.

  • Step 3:

Before applying the topcoat, make sure that every inch of the armrest is cleaned and dried. The soap needs to be removed from the surface properly. The topcoat is applied and dried. Make sure that no dust particles or dirt enters or touches the topcoat.

  • Step 4:

Take sandpaper and clean it well. This is done to remove the dust, dirt, or any allergens stuck in the sandpaper. Now, rub the surface of the vinyl armrest gently with the help of the sandpaper to make it smooth and level.

  • Step 5:

Apply two light coats again and buff the surface again with the help of the sandpaper lightly. Now, rest it for 30 minutes and it will be dried. You can use your vinyl repair kit. This is used to bring the color of the armrest. The liquid vinyl is mixed with the required color. Paint the cracked part or coat one with the help of that color. This is done to make the color of the entire armrest same.

Final Conclusion:

We hope the above-mentioned method would be helpful for you in repairing your broken or damaged vinyl chair armrest. These are simple steps that you can easily follow at your home too. You can also get the armrest changed if it is broken or is not in the condition to be repaired.

You Can Also Check these